3HXO Multi Element PTFE Immersion Heaters Over The Side For Acid Solutions
Product Description
Compatible with virtually any chemistry
Excellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element.
3 element, O shaped fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions up to 212°F (100°C). 1500-18000 watts, 120-600 volts.
Applications
PTFE Heaters
Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).
Excellent chemical resistance to aggressive acids.
PTFE Immersion Heater For Corrosive Chemical Heating Features
- PTFE sleeved 304 stainless elements inert to most solutions up to 212°F (100°C)
- Low watt density design 10 watts/square inch (1.5w/cm²)
- Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit
- Grounded internal metal element and built in thermal protector. Replaceable P1 protector standard for solutions up to 180°F(82°C)
- Certification: ISO9001, CE
Specifications
- 500 - 9000 watts
- 120 to 600 volts (600 volts on 4500 watts or lower only)
Options Available (Consult Factory)
- Resettable thermal protectors
- Polypropylene guards (sold separately)
- Custom configurations and lengths
- Custom wire and conduit lengths
Other Applications
Point Of Use Heating
Point of Use (POU) Heating refers to the energy-efficient heating method of placing a small heater near the processing bath to reduce heat-up wait times.
Products For Point Of Use Heating
Applications
- Semiconductor Wafer Cleaning
- Etching
- Inline Chemical Heating
- Point of Use Heating (POU)
|
High-Purity PFA Inline Chemical Heater
 |
PTFE Inline Heater
 |
Inline Chemical Heater
 |
RO/DI Water Heating
Deionized water (DI Water) has become a crucial part of many industrial process applications' impurity removal process. Cleaning semiconductors or other ultra-clean end-use devices requires the highest level of purity to reduce product failure.
Products For RO/DI Water Heating
Applications
- Semiconductor
- Flat Panel Display
|
Heating Systems for Purified, DI Water
 |
PTFE Inline Chemical Heater
 |
Electrochemical Deposition
Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Surplus products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.
Electrochemical Deposition Products
|
MOTS TRIPLE - VERTICAL
MOTS Triple Vertical: L-shaped, vertical metal over the side heater. 3,000-36,000 watts, 208-600 volts.
 |
9HS SERIES - TUBULAR
9HS PTFE Heater: Over the side, 9 element, tubular heater. Three phase. 9000-31500 watts, 208-600 volts.
 |
V SERIES - VARIPOWER
Metal or Fluoropolymer (PTFE) sheath heater. Single phase. Heats up to 212°F (100°C). 100-1000 watts, 120-240 volts.
 |
|
MOTS SINGLE
MOTS Single Heater - Chemical and Small Immersion Heater: Metal over the side single heater. Single or three phase. 1000-12000 watts, 120-600 volts.
 |
MOTS SINGLE - DAS, PHOSPHATE
MOTS Single DAS Phosphate Heater - Top Portable Electric Immersion Heaters: Phosphate, metal over the side heater. Single or three phase. 1000-10000 watts, 120-600 volts.
 |
MOTS TRIPLE - L SHAPED, DERATED
Derated, low watt density, L-shaped, bottom style metal over the side heater. 1500-18000 watts, 120-480 volts.
 |
